The B/S Spange may not adhere properly for several reasons, most commonly due to nail preparation or the adhesive itself. Below are the most common causes and how to address them:
Using too much B/S Cleaner
If too much liquid remains on the nail after cleaning, the residual moisture can significantly reduce adhesion. One drop of B/S Cleaner on a swab is sufficient to thoroughly degrease the nail.
Insufficient amount of adhesive
Using too little B/S Glue may result in the bonding surface of the B/S Spange not being fully covered, leading to poor adhesion. Make sure the glue is applied in an even layer.
Too Much Tension at the Edges
If the edges of the B/S Spange lift after application, the tension is too strong for the adhesive bond to hold. In this case, carefully file down the ends of the B/S Spange, or the entire B/S Spange if necessary, to reduce the tension. You can perform this fine adjustment directly on the nail.
Age, Temperature, and Handling of the B/S Glue
The B/S Glue has a shelf life of nine months. After this period, it may lose its effectiveness. The expiry date can be determined from the batch number on the lid (e.g. 1026 for October 2026). Always use B/S Glue at room temperature (23°C). Make sure the B/S Glue never comes into contact with the B/S Activator, as this will cause the glue to become stringy and dry out.
Contraindications Related to the Nail
The B/S Spange must not be used on diseased or severely altered nails, such as those affected by nail fungus, psoriasis, or onycholysis, since reliable adhesion cannot be guaranteed in these cases.